Different type of plastic powder - Material of powder coating line
Plastic powder - material of powder coating line
Standard color card
Tubes covered with powder coatings

Two basic types of powder coating plastic finishes are available: thermoplastic and thermoset. Typically, purchasers and manufacturers examine overall costs and potential coating complexity when deciding which type is most appropriate for their application. In each of the two classifications, there are a variety of sub-groups, and each individual powder is engineered for specific finish qualities.

Thermosets
Thermoset powder coating is applied the same way as thermoplastic powders. Unlike thermoplastic, thermosets go through a chemical cross-linking reaction that is non-reversible when baked. This cross-linking changes the physical properties of the plastic, typically hardening them into a solid coating. Some thermosets have the ability to withstand temperatures of over 1,000 degrees Fahrenheit and can compete with high temperature enamel paints. Thermosets cure harder than thermoplastics, and as some of these thermosets harden, they also become brittle, especially in thicker coats.

Acrylic
Unlike epoxy-based resins, acrylics do well in sunlight and blend over a surface, leaving a high gloss, wet-looking finish that is either clear or pigmented. At present, their use as automobile clear-coat is still in development due to their brittle hardness and lack of durability. Acrylics are nonetheless used extensively on certain automotive parts, such as wheels and exposed engine parts, where the owner wants this super gloss finish.